Nano-Scale Liquid Glass Coatings | Plastics & Metal

7654 WB Rapid On Multi Surface Protection / 7659 Concentrate

Water-based. Easy-to-use. Usable also as finish for ALGT 640 & 7660.

7654/7659 WB Rapid On creates an ultra-thin layer which bonds to the surface via an instantaneous electrostatic binding of billions of tiny silicium (silicon) molecules; comparable to the action of tiny magnets bonding to themselves and a ferrous substrate. As a result, microscopically small pores and capillaries are sealed and dirt particles and other impurities are unable to adhere to the now significantly smoother layer, and as a result coated surfaces are considerably easier to clean. In addition to providing an easy to clean surface, the coating is also highly hydrophobic and also provides an attractive glossy appearance. This coating can be used on almost all non absorbent surfaces such a shower screens, kitchen surfaces, bathroom surfaces , marine surfaces, windows,car bodywork and auto plastics. This is an exceptionally easy to apply coating which is ideal for commercial / facility management purposes and domestic application.


  • Water-based
  • Solvent-free
  • No odour
  • Excellent water-repellency
  • High-gloss effect
  • Silky smooth surface haptic
  • Resistant to nearly all acids, solvents and domestic grade alkaline cleaners
  • Easy-to-clean effect (e.g. from impurities produced by insects, bird droppings, exhaust pollutants, and other aggressive stains)
  • Very easy to apply
  • Much more stable than waxes or silicon-oil-based products
  • UV-resistant
  • Non-toxic
  • Non-flammable
  • Readily biodegradable (according to OECD criteria)
  • High abrasion resistance against wind-borne particles
  • Significant overall reduction of re-soiling
  • Temperature resistant from -40 to +200°C
  • pH resistant from 1-10
  • Not cytotoxic due to ISO 10993-5 + 12
  • Inhibit bacteria growth
  • Density about 1,00 g/cm³
  • Thickness of the layer: Appr. 40-50nm
  • VOC free



Thoroughly clean the surface. Spray or wipe the ready-to-use solution on to the target surface . It is suggested that an area of approximately 1m² is coated and then buffed, in sequence, in order to allow optimum application. Remove and surface misting (surplus coating) either by using water, or by wiping with a soft cloth or by polishing with a chamois.

Spray the target surface with a light film of water. Next, spray 8654 Quick Gloss on the moist surface and dry it immediately with a lint-free cloth (do not use a microfibre cloth). The product is active immediately. Alternatively, the product can also be applied on a clean, dry surface.

If the product dries too rapidly or if there is an over application of the coating, “white stripes” may become visible. They can be eliminated by adding a small amount of new product and polishing the surface again.

Ideal Use Cases

  • Cars
  • Boats
  • Household
  • Stainless steel surfaces
  • Varnished and metallic surfaces
  • Glass
  • Synthetic materials
  • Rubber
  • Chrome
  • Visors


SMI Test
  • Sandwich Corrosion Test, due to ASTM F 1110
  • Acrylic Crazing Test, due to ASTM F 484 Type C
  • Paint Softening Test, due to ASTM F 502
  • Hydrogen Embrittlement Test, due to ASTM F 519-93
Boeing Certified
DuPont™ Marine Finishes
7654 products range - dedicated to the yachting sector have been tested over DuPont™ Marine Finishes Topgloss SF and DP6940 Imron® Super Flow HS Clearcoat. No negative effect on coating has been observed.

Container Sizes

  • 7654-1: 1000 ml bottle
  • 7654-200: 200 litres barrel
  • 7654-1000: 1000 litres IBC container
  • 7659-1: Concentrate
    Coating: 3% = for 33,3 litres
    Maintenance: 1.5% = 66,6 litres