Car Coatings

8650 Permanent Pro Easy On

Professional 9H Quartz Ceramic Coating for Automotive Paintwork

Up to five minutes of working time. Fewer high spots. Less rework. A finish your customers can see and feel.

CCM 8650 gives professional detailers the time they need for a controlled application and a consistently flawless result – even on larger vehicle surfaces. Instead of rushing to buff off the coating, the generous working time of up to five minutes allows for a more relaxed, precise and reliable application.

The results are immediately visible: enhanced colour depth, brilliant gloss and exceptional paintwork smoothness that lasts. Water beads impressively with a contact angle of 113°, while dirt adheres far less easily and regular vehicle maintenance becomes noticeably easier.

  • Up to 72 months of long-term protection
  • Pencil hardness up to 9H
  • Consumption of only approximately 20–25 ml per vehicle
  • Exceptional, long-lasting paintwork smoothness
  • Powerful water-beading performance
  • Pronounced easy-to-clean effect
  • PFAS-free technology

More control during application. Greater cost efficiency per vehicle. And a finish your customers will notice from the very first touch.

8650 Detailing CCM

Test CCM 8650 on your next detailing project

Experience how easy professional ceramic coating application can be.

Frequently Asked Questions

What is 9H ceramic coating?

What does 9H mean?

How long does the 8650 ceramic coating last?

7650 Application in Japan

Performance your customers can see and feel

  • Enhanced colour depth, brilliant high gloss and long-lasting paintwork slickness
  • Long-term protection for up to 72 months when professionally prepared, applied and maintained
  • Controlled, user-friendly application for a consistent, professional finish
  • required per vehicle with professional application
  • adhere less strongly and are easier to remove
  • Highly hydrophobic paint surface with a water contact angle of up to 113°
  • Durable protection against everyday contaminants, including insect residue, tree sap, brake dust, tar and road salt
  • Transparent ceramic barrier layer with a pencil hardness of up to 9H
  • Modern, PFAS-free ceramic coating technology
  • Suitable for cars, classic vehicles, motorcycles, caravans, boats and other painted or powder-coated surfaces

Application of ceramic coating

Protection & Curing

  • Everyday protection: The cured ceramic barrier layer reduces the adhesion of common contaminants such as insect residue, tree sap, brake dust, tar, road salt and bird droppings, making them easier to remove during vehicle maintenance.
  • Mechanical resistance: The coating achieves a pencil hardness of up to 9H and increases the surface’s resistance under the conditions of this test method. It does not make the paintwork scratch-proof or protect it against stone chips.
  • Curing at room temperature: At 20°C, the coating is touch-dry after approximately one hour and weather-resistant after around 8–12 hours. It reaches its full performance after approximately five to seven days.
  • Accelerated curing: Controlled heat curing shortens the process. The temperatures and curing times specified in the application instructions must be observed.

Indepdently Tested Performance

Tested by an independent DEKRA laboratory with 800 hours of artificial weathering under dry-heat climate conditions, based on MBN 51000-5:

  • No visible change after 800 hours of artificial weathering
  • Excellent adhesion: Gt 0 – no flaking of the coating, tested according to DIN EN ISO 2409
  • Excellent colour stability: ΔE < 1, tested according to DIN EN ISO 11664-4
  • Excellent gloss retention: only minor changes in the low single-digit percentage range, tested according to ISO 2813

Available Sizes

  • 8650-50: 50 ml bottle
  • 8650-100: 100 ml bottle
  • 8650-500: 500 ml bottle

Downloads & Videos