Nano-Scale Liquid Glass Coatings

695 Textile & Suede Coating /
697 Concentrate

CCM® water-based 695 Textile & Suede Coating provides effective protection against water, oils and everyday stains while maintaining the natural appearance, feel and breathability of treated fabrics. Suitable for a wide range of textiles, upholstery, carpets and selected suede materials, it offers excellent easy-to-clean properties. The coating is available ready-to-use (695) or as a concentrate (697) for flexible and economical application.

Properties

  • Water and oil repellent (hydrophobic and oleophobic)
  • Reduces the penetration of water, oils, grease and other liquids
  • Stain protection against coffee, tea, wine, cola and food oils
  • Excellent easy-to-clean properties
  • Reduces the adhesion and penetration of dirt particles
  • Ultra-thin, transparent protective layer on individual fibres
  • Breathability is largely maintained
  • No significant impact on the appearance or feel of treated textiles
  • Colourless and virtually odourless once dry
  • Water-based, VOC-free formulation (695 ready-to-use)
  • Easy application by spraying, dipping or rolling
  • Room-temperature curing within 12–24 hours
  • Good resistance to diluted cleaning agents
  • No added nanoparticles
  • The durability of the protective effect depends on mechanical abrasion, exposure conditions and maintenance.

Advanced oleophobic surface protection with low PFAS concentrations

CCM® SiO₂-based textile protection technology combines effective oleophobic performance with low concentrations of PFAS in the ready-to-use formulations.
The 697 concentrate has a documented PFAS concentration of 6,000 ppb (parts per billion). Through controlled dilution, the calculated PFAS concentration is reduced to 600 ppb in product 695 and can be reduced further to 400 ppb when 697 is diluted at a ratio of 1:14.

PFAS Concentration at Different Dilution Ratios

Product / Formulation Dilution Ratio Calculated PFAS Concentration
697 – Concentrate Undiluted 6,000 ppb
695 – Ready-to-use 1:9 600 ppb
697 – Diluted 1:10 545 ppb
697 – Diluted 1:11 500 ppb
697 – Diluted 1:12 462 ppb
697 – Diluted 1:13 429 ppb
697 – Maximum dilution 1:14 400 ppb

Dilution ratios indicate one part concentrate plus the specified number of parts water. Concentrations are calculated from the documented PFAS content of 697.

Putting These Concentrations into Perspective

At concentrations of 400–600 ppb, the amount of PFAS in 150 litres of liquid corresponds to approximately 60–90 milligrams — comparable in mass to just one or two small drops of water.
This comparison illustrates the low quantities of PFAS present in the ready-to-use formulations. It is a mass comparison and does not imply that the substances have the same environmental or toxicological properties as water.
The formulations combine C6-based chemistry with SiO₂-based surface protection technology to deliver effective oleophobic performance.

Note: Calculated concentrations are not a stand-alone demonstration of compliance with Regulation (EU) 2024/2462.

Container Sizes

Size 695 (ready-to-use) 697 (concentrate)
1 litre: bottle 695-1 697-1
5 litre: container 695-5 697-5
20 litre: container 695-20 697-20
200 litre: drum 695-200 697-200
1000 litre: IBC 695-1000 697-1000

Videos