Concrete Waterproofing
Nano Scale Coatings

Concrete Waterproofing

We protect concrete

CCM offers advanced concrete waterproofing technologies in cooperation with Evershield GmbH, the European subsidiary of Radcrete (Australia). The systems provide deep-penetrating, long-lasting protection for concrete structures – without the need for membranes or coatings.

Our product range includes two complementary solutions:

Radcon Formula #7®

Radcon Formula #7® is a spray-on waterproofing system for hardened concrete. It penetrates the surface, reacts with the concrete's free lime, and forms a permanent gel that blocks water pathways. Ideal for roofs, decks, bridges, and infrastructure exposed to weather and water.

Radmyx Liquid

Radmyx Liquid is a crystalline admixture added to fresh concrete during batching. It becomes an integral part of the structure, forming crystals that grow within the pores and capillaries, permanently sealing the concrete from within. Best suited for foundations, basements, tanks, and below-grade structures.

Both systems are designed for durability, minimal maintenance, and long-term performance – helping protect concrete from moisture ingress, corrosion, and environmental damage.

Radcon Formula #7®

A revolutionary & reliable way to waterproof concrete without using a membrane.

Radcon #7® is spray applied and penetrates into the concrete and creates a gel within the cracks, pores and capillaries. It incorporates advanced biochemical technology which allows it to seal cracks up to 2.00mm and reseal hairline cracks that develop after treatment.

Radcon #7® does not form a film on the surface so it cannot be damaged by traffic or environmental exposure. Radcon #7® is a sub-surface barrier that can accommodate thermal stress.

Key Benefits

  • 100% trafficable - no protection required
  • Lowers risk - faults are easy to find and fix
  • Tolerates thermal stresses - gel composition not rigid
  • Fast and efficient to apply
  • Treatment will last the life of the concrete
  • The world's most environmentally friendly concrete waterproofing
Radcon Formula #7: How it works

How does it work?

After application Radcon Formula #7® forms a Calcium-Silicate-Hydrate (C-S-H) gel complex. This remains reactive to moisture in the pores and cracks of the penetrated zone. The calcium in the gel reacts with the atmosphere to create a low-calcium gel depositing calcium carbonate, filling cracks and pores. The low calcium gel is "hungry" for more calcium, which is provided by moisture and cement hydration. This cycle repeats over time and finds balance until water ingress is stopped. The biochemical compounds in Radcon Formula #7® are essential for this unique catalytic reaction.

RADMYX™

RADMYX™ crystalline waterproofing provides a cost effective and environmentally friendly system which gives total waterproofing protection for the life of a concrete structure.

It reacts with the hydration products of cement to form crystals within the cracks, pores and capillaries of concrete structures – thereby effectively blocking the passage of water.

RADMYX™ can be added to fresh concrete as an admixture or applied onto an existing surface as a slurry.

Not only does RADMYX™ enhance the quality and durability of the concrete, it causes the concrete to become permanently self-sealing and water pressure resistant: thereby effecting great cost savings in labour and maintenance during construction and for the life of the structure.

Key Benefits

  • Provides lifetime waterproofing for concrete
  • Seals initial and future cracks to 0.4mm
  • Simple - added to fresh concrete as an admixture or applied to existing structures as a slurry
  • Low risk - unlike membranes which can delaminate, deteriorate or puncture
  • Speeds construction times – Back-filling can commence immediately
  • Efficient - speeds construction, saving money
  • Works positive and negative side
  • Withstands hydrostatic pressure

How does it work?

RADMYX™ achieves its self-sealing capability through a unique formula utilising the capacity for regenerative crystal growth.

RADMYX™ can be added to the concrete as an admixture or applied onto an existing surface as a slurry. The active chemicals in RADMYX™ react with the cement particles in the concrete (in a similar way to cement hydration itself) to form insoluble, fibre-like crystals. These crystals fill the cracks, pores and capillaries in the concrete to stop the flow of water and resultant leakage through the concrete.

The active chemicals within RADMYX™ remain dormant in the concrete indefinitely. Once these chemicals again come into contact with water – for example, if there is a crack which allows water into the concrete – the chemical process is re-activated and continues to grow crystals through the concrete, sometimes reaching many centimetres in length.

This ability to constantly re-activate in the presence of moisture guarantees the concrete will achieve 100% waterproof capability for the life of the structure, as the concrete now has the capacity to self-seal on a continuous basis.

The reason that the crystals are able to continue to grow indefinitely is because the process is similar to the hydration of cement itself. Only a very small portion of the cement reacts during the initial hydration of the concrete. Therefore the vast majority of the cement particles are unreacted and in the future it is these particles that RADMYX™ react with effectively.The RADMYX™ particles are the catalyst for a bigger reaction in the concrete. Because RADMYX™ is added to the concrete as a pure concentrate, unlike other crystalline products which are typically diluted with sand and cement, there is more actual crystalline available and its ability to continue producing crystals in the future is superior to others.

The crystals themselves are not just made up of RADMYX™ they grow from the reaction caused by RADMYX™ and the unreacted cement particles. Only a tiny amount of RADMYX™ is needed to react with the cement particles and grow into long, narrow crystals through the concrete. Because such a small amount of RADMYX™ is used creating crystals and the balance remains dormant in the concrete until further cracks develop, the RADMYX™ is never used up, allowing it to continue for the life of the structure.

Due to the fact that RADMYX™ causes the continuous growth of long, narrow crystals within the concrete even if it is applied to one side of a wall as a slurry, it can grow through the entire thickness of the concrete and provide waterproofing on the other side of the structure.
Warranty

Radcrete Pacific provides a 15 year warranty