Coatings for Camper Vans & Boats

This coating is loved by boat detailers. It provides an amazingly “low friction” layer. It is very easy to apply, simply wipe on and buff (e.g., by using a polishing machine). It can be used for internal and external surfaces and it provides a super smooth, easy to clean, hydrophobic surface. It is not designed to be a highly durable coating but it will still last for at least 6 months on the exterior surface of a motor home.

This coating is an exceptionally easy to apply yet durable and long lasting coating. It is designed to provide a quick and easy hydrophobic coating. Simply spray the coating on to the target surface, usually external paintwork, plastic seating, (boats) stainless steel fittings etc. After spraying on the water-based liquid, simply wipe the surface and lightly buff if required. It takes seconds to apply and will last up to 6 months. Very easy to re-apply.

This is a highly durable DIY liquid glass coating. It requires greater care when preparing for application. To gain maximum performance from this coating, it is important that all target surfaces must be perfectly clean and dry. The coating is applied in seconds. Simply wipe this liquid glass on to the surface and then buff some minutes later. It will withstand many tens of thousands of wiping actions. It is suitable for stainless steel, plastic and painted surfaces, e.g., headlights, body work, instrument panels, bridge windows, air-craft windows, motorcycle visors, cockpit areas, oven tops. It is heat resistant to 250°C.

This coating is like a “supercharged 97656”. It is applied in the same way, by wiping, but it is a significantly more durable coating as at 900+/- nano meters it is approximately 9 times thicker than 97656. It can be applied to metal, plastic, glass and painted surfaces. It provides a super durable, non-staining hydrophobic coating which will last for several years on the bodywork of a car, boat hull or aircraft. The coating, which provides a super glossy surface is also highly resistant to solvents, acids and alkalis. It is also massively heat tolerant. This coating can be used on almost all non-porous surfaces and it is fast and easy to apply.

97640 is an extremely durable nano coating developed for professional use in the marine and yacht industry. It provides long-lasting protection for surfaces continuously exposed to water, UV radiation, salt, dirt, and harsh environmental conditions.

Depending on the application requirements, 97640 can be applied either by spray or by hand. Once cured, the coating forms a tough, high-gloss protective layer with excellent hydrophobic properties. Water, dirt, and deposits adhere far less to the surface, making cleaning and maintenance significantly easier. At the same time, the coating provides reliable protection against corrosion, UV exposure, staining, chemicals, and general environmental wear.

The coating is suitable for almost all hard surfaces on boats and yachts, including gelcoat, painted surfaces, aluminium, stainless steel, plastics, composite materials, superstructures, masts, and spa or wellness areas on board. It is especially recommended for aluminium hulls and structures where long-term corrosion protection is essential.

Coated surfaces can be cleaned easily with pressure washers without affecting the performance of the coating.

Application below the waterline is generally possible. However, on vessels requiring conventional anti-fouling systems, it should be noted that anti-fouling coatings may not bond effectively to the cured 97640 layer. For this reason, the product is particularly suitable for speed boats, performance boats, tenders, and jet skis, where anti-fouling coatings are often not required.

When professionally applied, 97640 delivers long-term surface protection, a premium appearance, and significantly reduced maintenance requirements.