Protection

Easy Clean Graffiti Protection

Graffiti Protection 7626

A one pack single coat permanent non-sacrificial coating giving excellent protection against fly poster and graffiti attack. The product allows easy repeated removal of graffiti by using water/detergent.

7626 Graffiti Protection is ideally suited for locations which encounter regular graffiti events. It offers enormous flexibility in terms of application. It can be applied to almost all surfaces. The layer itself is also flexible and this characteristic is the reason why graffiti is unable to bond effectively, thus creating a world leading, vandal resistant finish.

7626 Graffiti Protection is completely resistant to ALL paints, permanent markers and the majority of acids. Simply wash with water and graffiti disappears and posters just slide off, providing permanent protection against graffiti attack – without ghosting residue.

7626 Graffiti Protection is idea, for the following applications: Aluminum Siding, Fibreglass, Glass*, Masonry (includes brick, marble, stone,tile, granite and concrete), Metal*, Street Signs, Stucco, Utility Boxes, Viny, Siding, Wood, Plastic*

*Bonding to polished and smooth surfaces is not as profound as bonding to roughened or porous surfaces.

Attributes

  • Single component system - very strong bonding
  • Touch resilient finish
  • Rapid curing
  • Prolonged protection – zero ghosting
  • Clear and coloured
  • Long term protection
  • No „Dangerous Goods“ shipping fees
  • Breathable

Technical Specification

Colour Clear and pigmented liquid
Dilutable No
Application Application with brush roller or airless spray, (it can‘t be applied with a conventional hvlp spray). Airless:
- 16 thousand size tip or higher
- Cleaning: Nappy (white spirit)
Volume Solids 78% Matt; 78% Gloss; 48% pigmented
Recommended Film Thickness Depending on substrate and porosity, normally between 50-80 DFT
Coverage Rate 6 to 8 square metres per litre, when applied to a smooth surface with a fine pile 4 inch/10 cm roller. This will create a coating of appr. 70 microns. This is the minimum functional coating thickness. A slightly thicker coating at approximately 130 microns creates a more stable, longer lasting coating. (eg polycarbonate paneling often used at the side of motorways). Porous surfaces such as brick stone etc. should have a WFT (wet film thickness) of 150 microns which dry back to about 115 / 120 DFT (dry film thickness) subject to the porosity of the surface
Breathable Yes
Urine-resistant Yes
Paintable Only with this pigmented Graffiti Protection 7626, not with standard paints
Drying Time Touch dry 3 / 4 hours; full cure 24 hours.
Recoating (if required) time 3 to 4 hours
Thinners/Brushwash Disposal
Weight Per Litre 0.90-1.02
Flash Point Above 64°C
V.O.C. 50 grams per litre
Viscosity 76% high solids
Finish Gloss – Semi Matt
Gloss Reading 62-68 at 60 degree reflectance angle
Application Temperature -5°C to +60°C, all surfaces must be clean and dry, remove any soiling by power
Temperature Resistance -40°C to +50°C
Storage Temperature +5 to +25°C, out of direct sunlight
Shelf Life 1 Year
High Pressure Cleaner Max. 80 bar at 30-40 cm distance (flat jet nozzle, NOT dirt milling machine or point jet nozzle, apply the nozzle from the outer edge of the graffiti to be removed)
Surface Preparation All surfaces must be clean and dry, remove any soiling by power wash etc. Any soiling/graffiti apparent on painted surfaces i.e. masonry/rendered walls should be re-painted with good quality masonry exterior paint, prior to application. Non-Darkening Primer should be considered for application prior to top coat on all sandstone/brick surfaces. The rougher the surface the better the bonding.
Bundle (Art. No.) 5 liter canister (7626)
20 liter canister (7626-20)
Water Vapour Permeability Class V2 as of EN ISO 7783-2
CO2 Permeability >S0m as of EN ISO 1062-6
Fire Rating Class 1 as of BS 476 Part 7
Class 0 as of BS 476 Part 6